Microaces Bristol F.2b S.No. C801 of No.5 Sqdn.
Post War Livery Bristol Fighter
The Microaces Aero Bristol F2b 'Brisfit' is designed from the ground up and is possibly the most detailed and realistic microscale aircraft of its type. The airframe is designed to take most ultra micro RC equipment found in similar sized RTF aircraft. Double sided printing directly onto foam ensures a light, low wing load aircraft with lots of character and predictable flight characteristics.
History in the Making
Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. This beautiful silver winged aircraft served as part of RAF 5 Squadron in the 1920s in Quetta, India. No.5 Squadron used the Bristol F.2b in front line service right up until 1931. They were the last British squadron to de-commission this magnificent aircraft.
In addition to the detail already lavished on the Microaces Aero Bristol F.2b kit, the No.5 Squadron aircraft also includes the tropical radiator mounted under the nose (additional cooling required in the hot condition it was operating in) and the extended exhaust system down both sides of the fuselage. Enormous static appeal as well as a presence in the air that belies its diminutive 1/24th scale.
Aero Bristol F2b Model
|Controls||Rudder, Elevator, Throttle|
|Length||325mm / 12.8"|
|Wingspan||500mm / 19.7"|
|Wing Area||7.00 sq dm / 108.5 sq in.|
|Wing Load||6.57g/sq.dm / 2.13oz/sq.ft.|
(N.B. Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
|Rec. Motor / G.Box||Parkzone PKZ3624 (P-51 Motor/Gearbox)|
|Rec. Prop||GWS 5030|
|Skill Level - Build||Intermediate|
|Skill Level - Pilot||Intermediate|
|Tools required||Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers|
|Rec. Adhesive||UHU por / Foam safe CA / Aliphatic glue|
|SHEET PARTS||2mm laser cut Depron Airframe sheet|
|1mm printed & laser cut Depron fuselage sheet x 2|
|1mm printed & laser cut Depron flight surfaces sheet x 2|
|200 micron printed & laser cut polypropylene sheet x 2|
|polyester sticker sheet|
|LOOSE PARTS||0.8mm laser cut plywood motor mount|
|Two 30mm Ø neoprene rubber tires|
|Six 3mm Ø noedymium magnets|
|50mm x 4mm Ø plastic tube|
|1mm x 0.4mm carbon fibre strips|
|1mm Ø carbon fibre rod|
|pre-shaped piano wire elevator & rudder control rods|
Spares & Accessories
For building and finishing your Microaces Aero Kit see our Spares & Accessories page
Click on booklet to view online!