Microaces Scrappee PATRIOT II Micro Trainer Kit
What is Scrappee?
An easy to build, stable flying model kit, created as an introduction to the world of micro radio controlled aviation.
If you're looking for a way into a fantastically absorbing hobby then there is no better way than building and flying your own model.
The Scrappee has been designed from the ground up by Microaces to satisfy a number of goals:
- An easy, quick build kit that's also tough AND repairable.
- The ultimate introduction to building strong, lightweight micros using modern materials.
- An ideal platform for learning to fly micro radio control.
However, the Scrappee is not exclusively for the beginner. Because of its wide speed envelope, light weight and clean lines it can climb fast, loop big and turn quickly. Indoors and out, even in a breeze, its a great performing airplane that can be enjoyed by seasoned modelers too.
Scrappee Patriot II
A more utilitarian take on the Scrappee marque, the Patriot II represents a tough military workhorse version with clipped wings and tail, military style 'Polar' camouflage and a more rugged appearance. Ideal for exploring bleak tundra or the local park!
The kit is available as Kit Only - which provides you with the complete airframe, OR you can select (from the drop down menu at the top of this page) Kit + Flight Pack, which includes the All In One (AIO) receiver with on board control servos, plus motor/gearbox and prop & adapter to complete the model.
Scrappee kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.
Microaces will also be producing video support for the build that will be available to all once Scrappee becomes available.
Click on the booklet to download!
Microaces Scrappee Classic
|Controls||Rudder, Elevator, Throttle|
|Length||330mm / 13"|
|Wingspan||430mm / 17.0"|
|Wing Area||3.68 sq dm / 57 sq in.|
|Flying Weight.||37 - 39g/1.3 - 1.4oz|
|Wing Load||~10.3 g/sq.dm / 3.4 oz/sq.ft.|
Parkzone PKZ3351, PKZ3352
|Rec. Motor / G.Box||
OR Parkzone PKZ3624
1 Cell Lipo. 130-180mAh 1S 25C with
E-Flite EFLB1501S45 works well!
|Rec. Prop||GWS 4530|
|Skill Level - Build||Beginner|
|Skill Level - Pilot||Beginner|
|Rec. Adhesive||UHU por|
|SHEET PARTS||2mm laser cut Depron Airframe sheet|
|1mm printed & laser cut Depron fuselage sheet|
|1mm printed & laser cut Depron flight surfaces sheet x 2|
|200 micron printed & laser cut polypropylene sheet|
|polyester sticker sheet|
|LOOSE PARTS||0.8mm laser cut plywood motor mount|
|Two 30mm Ø Sponge rubber tires + 3D printed hub assembly|
|Four 3mm & two 4mm Ø noedymium magnets|
|2mm Ø carbon fibre rod axle|
|pre-shaped piano wire elevator & rudder control rods|