Microaces Sopwith Camel - D8118
DUE FOR DESPATCH IN OCTOBER 2018. AVAILABLE NOW TO PRE-ORDER. RESERVE YOURS NOW!
History in the Making
Microaces love of aviation history ensures that the aircraft we reproduce as kits look fantastic on static display as well as in the air.
The Microaces Sopwith Camel replicates one of the most iconic aircraft of the WWI era to a level that sets a new bar for micro scale RC. The livery of this kit is that of D8118, flown by Ace Pilot Major John Ingis Gilmour, the highest scoring Scotsman of WWI.
Included in this multi-media model is a vac-formed cowl, free spinning 3D printed fuel pump prop and rigging part PLUS a spinning dummy rotary engine kit. All these extras add an incredible level of mechanical and visual detail to this astounding model.
Devil in the Detail
There is also an additional Detail Pack available for this model.
The Pack contains four 3D printed 50lb Cooper bombs plus ply and laser cut plastic parts that assemble to replicate the bomb rack, creating an extra-ordinary level of detail never seen in an RC kit of this scale before. When ordering, select the Kit with detail pack to include it in your order!
NOTE: The dummy motor requires an elongated prop shaft for your PKZ3624 motor/gearbox or use a 'rotary ready' Microaces Motor/Gearbox.
Microaces Sopwith Camel Kit
|Controls||Rudder, Elevator, Throttle|
|Length||240mm / 9.4"|
|Wingspan||360mm / 14.2"|
|Wing Area||4.1 sq dm / 63 sq in.|
|Flying Weight.||36 - 38g/1.2 - 1.3oz|
|Wing Load||~9.0 g/sq.dm / 2.9 oz/sq.ft.|
Parkzone PKZ3351, PKZ3352 or PKZUA1151
|Rec. Motor / G.Box|
|Rec. Battery||130-160mAh 1S Lipo|
|Rec. Prop||GWS 4530|
|Skill Level - Build||Intermediate|
|Skill Level - Pilot||Intermediate|
|Tools required||Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers|
|Rec. Adhesive||UHU por / Foam safe CA / Aliphatic glue|
2mm laser cut Depron Airframe sheet
1mm printed & laser cut Depron fuselage sheet
1mm printed & laser cut Depron flight surfaces sheet
200 micron printed & laser cut polypropylene sheet
|polyester sticker sheet|
|0.8mm plywood parts sheet|
|LOOSE PARTS||Two 30mm Ø neoprene rubber tires|
|Vacuum formed scale cowl|
10mm brass sleeve for rotary engine
3D printed fuel pump prop and rigging detail
|Two 4mm Ø noedymium magnets|
|100mm x 6mm Ø plastic tube|
|200mm x 5mm Ø plastic tube|
|1mm x 0.4mm carbon fibre strip|
|1mm Ø carbon fibre rod|
pre-shaped piano wire elevator & rudder control rods