Microaces Bristol F.2b S.No. D8084 - New Release
REVISED KIT with GREATER DETAIL and a PRINTED ASSEMBLY GUIDE
Bristol Fighter F2b Serial No. D8084
The latest Microaces kit sees a substantial kit revision that incorporates a rib-less wing design for a more scale appearance, plus a number of new scale features and options to make it even more appealing to the scale enthusiast.
The Microaces Bristol F2b 'Brisfit' kit can arguably reclaim the title of 'the most detailed microscale aircraft of the Microaces range'. Now with strut mounted pitot tube and a 3D printed rotating fuel pressure pump prop mounted on the undercarriage included in the kit.
If purchasing the kit with a Flight Pack, it is now paired with Microaces PLUS pack. This includes the larger 23mm x 8.5mm coreless motor that provides more grunt for a few extra grams of weight. An absolute must if you're hauling 250lbs of ordnance off the ground!
History in the Making
Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. Brisfit D8084 was flown by Australian Pilot Ace Capt. Sydney Dalrymple of No.139 Squadron based in Northern Italy in 1918.
The Bristol F.2b was originally designed as a bomber and, although it was much more successful as a fighter aircraft, it retained the capability to carry ordnance on three detachable racks on the underside of the lower wings.
We've 3D modeled the rack of four 25lb Cooper bombs and the more substantial Royal Laboratories 112lb HE bomb and rack that can be attached to any of the three points on the Brisfit to elevate the level of detail of this kit beyond anything available at this scale (and a good deal larger too).
The ordnance can be taken into the air too: the weight of the Cooper Bomb Rack is 1.8g and the RL 112lb Bomb and Rack is even lighter at only 1.2g. So the effect on flight performance is minimal.
Add the ordnance to your order by selecting the desired option above or add each rack separately to your cart by visiting the new Detail Packs page!
3D Printed Pilots
A fantastic enhancement to the kit, that really upgrades the level of realism is a 3 dimensional pilot. Add one to your order for the ultimate 'finishing touch'!
Aero Bristol F2b Model
|Controls||Rudder, Elevator, Throttle|
|Length||325mm / 12.8"|
|Wingspan||500mm / 19.7"|
|Wing Area||7.00 sq dm / 108.5 sq in.|
|Wing Load||7.61g/sq.dm / 2.49oz/sq.ft.|
Microaces AIO Receiver
|Rec. Motor / G.Box||Microaces Micro Motor & Gearbox PLUS|
|Rec. Prop||GWS 5043|
|Skill Level - Build||Intermediate|
|Skill Level - Pilot||Intermediate|
|Tools required||Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers|
|Rec. Adhesive||UHU por / Foam safe CA / Aliphatic glue|
|SHEET PARTS||2mm laser cut Depron Airframe sheet|
|1mm printed & laser cut Depron fuselage sheet x 2|
|1mm printed & laser cut Depron flight surfaces sheet x 2|
|200 micron printed & laser cut polypropylene sheet x 2|
|polyester sticker sheet|
|LOOSE PARTS||0.8mm laser cut plywood motor mount|
|Two 30mm Ø neoprene rubber tires|
|Six 3mm Ø noedymium magnets|
|50mm x 4mm Ø plastic tube|
|1mm x 0.4mm carbon fibre strips|
|1mm Ø carbon fibre rod|
|pre-shaped piano wire elevator & rudder control rods|
|3D printed fuel pump prop|
Spares & Accessories
For building and finishing your Microaces Aero Kit see our Spares & Accessories page.
A new illustrated and printed Assembly Guide is included with the kit.