Nieuport 17 Duo Pack 'Les Deux As'
History in the Making
Microaces love of aviation history ensures that the aircraft we reproduce as kits look fantastic on static display as well as in the air.
These two Microaces Nieuport kits replicate one of the most famous French built sesquiplane fighter of WWI flown by Les Duex As (the two aces), renowned French pilots Charles Nungesser and René Dorme.
Nungesser's aircraft is presented in the ubiquitous silver finish of the N17 with his infamous skull and bones emblem on the fuselage flanks, identifying him as the 'Knight of Death'. Dorme's aircraft has a brown, green and sky blue camouflaged scheme with his squadron symbol of a stork (Escadrille N.3 - Les Cigognes) emblazoned on the side.
Included in these multi-media models is a vac-formed cowl and spinning dummy rotary engine kit. The resulting models have an incredible level of mechanical and visual detail that look great on display but even better when airborne.
This kits include a printed Colour Assembly Guide
NOTE: The dummy rotary motor requires an elongated prop shaft for your PKZ3624 motor/gearbox or use a 'rotary ready' Microaces Motor/Gearbox.
3D Printed Pilots
A fantastic enhancement to the kit, that really upgrades the level of realism is a 3 dimensional pilot. Add one to your order for the ultimate 'finishing touch'!
Microaces Nieuport 17 C.1 Kit
|Controls||Rudder, Elevator, Throttle|
|Length||250mm / 9.8"|
|Wingspan||360mm / 14.2"|
|Wing Area||3.3 sq dm / 51 sq in.|
|Flying Weight.||36 - 38g/1.2 - 1.3oz|
|Wing Load||~11.2 g/sq.dm / 3.7 oz/sq.ft.|
Parkzone PKZ3351, PKZ3352 or PKZUA1151
|Rec. Motor / G.Box|
|Rec. Battery||130-160mAh 1S Lipo|
|Rec. Prop||GWS 4530|
|Skill Level - Build||Intermediate|
|Skill Level - Pilot||Intermediate|
|Tools required||Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers|
|Rec. Adhesive||UHU por / Foam safe CA / Aliphatic glue|
2mm laser cut Depron Airframe sheet
1mm printed & laser cut Depron fuselage sheet
1mm printed & laser cut Depron flight surfaces sheet
200 micron printed & laser cut polypropylene sheet
|polyester sticker sheet|
|0.8mm plywood parts sheet|
|Full colour Assembly Guide|
|LOOSE PARTS||Two 30mm Ø neoprene rubber tires|
|Vacuum formed scale cowl|
10mm brass sleeve for rotary engine
|Two 4mm Ø noedymium magnets|
|100mm x 6mm Ø plastic tube|
|200mm x 5mm Ø plastic tube|
|1mm x 0.4mm carbon fibre strip|
|1mm Ø carbon fibre rod|
pre-shaped piano wire elevator & rudder control rods
Click on front cover to download PDF file