Microaces Aero Fokker E.V/D.VIII Polish Livery Kit
Flown by Lieutenant Stefan Stec 1919
In WWI, Polish forces captured 17 Fokker aircraft of which six E.V versions and one D.VIII version were used in the Polish-Soviet War of 1919 to 1920. Lieutenant Stefan Stec earned the first kill for the Polish Air Force, by shooting down a Ukrainian Nieuport fighter on 29 April 1919.
History in the Making
In early 1918 Fokker produced the Fokker E.V parasol winged monoplane. Even though production versions employed the obsolete Oberursel Ur.II, the aircraft's low drag and light weight meant it was nevertheless fast compared to its rivals.
Microaces love of aviation history ensures that the aircraft we reproduce as kits look fantastic on static display as well as in the air.
The Microaces 'Flying Razor' comes complete with a vac-formed cowl and a spinning Oberursel Ur.II dummy rotary engine kit, that adds an incredible level of mechanical detail to this astounding model.
The model also employs a linked aileron and rudder conrtrol system operating from a single servo. This ensures that the kit retains its distinct flat 'razor like' wing and provides a scale replication of the way
NB. The dummy motor does require an elongated prop shaft for your PKZ3624 motor/gearbox or add a 'rotary ready' Microaces Motor/Gearbox.
Aero Fokker E.V (D.VIII) Model
|Controls||Linked Aileron & Rudder, Elevator, Throttle|
|Length||248mm / 9.76"|
|Wingspan||366mm / 14.4"|
|Wing Area||2.34 sq dm / 36 sq in.|
|Flying Weight.||29 - 31g/1.0 - 1.1oz|
|Wing Load||~12.8 g/sq.dm / 4.19 oz/sq.ft.|
|Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410
(N.B. Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
|Rec. Motor / G.Box||
Parkzone PKZ3624 (P-51 Motor/Gearbox)
NB: Kit requires EFLU3004 extended prop shaft
|Rec. Prop||GWS 4040, GWS 4530|
|Skill Level - Build||Intermediate|
|Skill Level - Pilot||Intermediate|
|Tools required||Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers|
|Rec. Adhesive||UHU por / Foam safe CA / Aliphatic glue|
|SHEET PARTS||2mm laser cut Depron Airframe sheet|
|1mm printed & laser cut Depron sheet|
|200 micron printed & laser cut polypropylene sheet|
|polyester sticker sheet|
|0.8mm plywood parts sheet|
|LOOSE PARTS||Two 30mm Ø neoprene rubber tires|
|Vacuum formed scale cowl|
|3D Printed aileron boss x 2|
|10mm brass sleeve for rotary engine|
|Two 4mm Ø noedymium magnets|
|100mm x 6mm Ø plastic tube|
|200mm x 5mm Ø plastic tube|
|1mm x 0.4mm carbon fibre strip|
|1mm Ø carbon fibre rod|
|Rigging & control wire|
|Profile pilot figure|
|pre-shaped piano wire elevator & rudder/aileron control rods|
Spares & Accessories
For building and finishing your Microaces Aero Kit see our Spares & Accessories page
Click on booklet to view online!