Microaces Aero Fokker Dr.1 Göring Kit
Flown by Oblt. Hermann Göring 1917
The Fokker Dr.1 is the latest iconic WWI aircraft to be replicated by Microaces. This particular livery was flown by the infamous Hermann Göring.
The Dr.1 kit includes a vacuum formed plastic cowl, extensive laser cut light plywood parts and a replica Oberursel II rotary engine kit that actually spins with the prop!
History in the Making
Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air.
The Microaces 'Dreidecker' comes complete with a vac-formed cowl and a spinning Oberursel Ur.II dummy rotary engine kit, that adds an incredible level of mechanical detail to this astounding model.
NB. The dummy motor does require an elongated prop shaft. Fortunately those fabulous chaps at E-Flite make one for one of their micros so it's available as a spare part. Order an EFLU3004 from your local or preferred E-Flite reseller in preparation for the kit or add one to your pledge kit order HERE!
Aero Fokker D.VII Model
|Controls||Rudder, Elevator, Throttle|
|Length||245mm / 9.6"|
|Wingspan||305mm / 12"|
|Wing Area||3.32 sq dm / 51 sq in.|
|Flying Weight.||32 - 34g/1.2 - 1.4oz|
|Wing Load||~9.9 g/sq.dm / 3.0 oz/sq.ft.|
|Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410
(N.B. Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
|Rec. Motor / G.Box||
Parkzone PKZ3624 (P-51 Motor/Gearbox)
NB: Kit requires EFLU3004 extended prop shaft
|Rec. Prop||GWS 4040, GWS 4530|
|Skill Level - Build||Intermediate|
|Skill Level - Pilot||Intermediate|
|Tools required||Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers|
|Rec. Adhesive||UHU por / Foam safe CA / Aliphatic glue|
|SHEET PARTS||2mm laser cut Depron Airframe sheet|
|1mm printed & laser cut Depron fuselage sheet|
|1mm printed & laser cut Depron flight surfaces sheet|
|200 micron printed & laser cut polypropylene sheet|
|polyester sticker sheet|
|0.8mm plywood parts sheet|
|LOOSE PARTS||Two 30mm Ø neoprene rubber tires|
|Vacuum formed scale cowl|
|10mm brass sleeve for rotary engine|
|Two 4mm Ø noedymium magnets|
|100mm x 6mm Ø plastic tube|
|200mm x 5mm Ø plastic tube|
|1mm x 0.4mm carbon fibre strip|
|1mm Ø carbon fibre rod|
|pre-shaped piano wire elevator & rudder control rods|
Spares & Accessories
For building and finishing your Microaces Aero Kit see our Spares & Accessories page
Click on booklet to view online!