Microaces IS Making History
Cart 0

Microaces Aero Fokker D.VII 'Li' Kit

£40.00

Flown by Rudolf Stark 1918

The first in a brand new line of micro-kits from Microaces. The Fokker is designed from the ground up and is possibly the most detailed and realistic microscale aircraft of its type. The airframe is designed to take most ultra micro RC equipment found in similar sized RTF aircraft. Double sided printing directly onto foam ensures a light, low wing load aircraft with lots of character and predictable flight characteristics.

History in the Making

Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. Although introduced in the later stages of WWI, the Fokker D.VII was a seriously formidable combat aircraft. Designed through the lessons of its predecessors it was comparitively stable, fast and maneuverable and was quickly liked by the pilots who flew it.

Specification

Aero Fokker D.VII Model

Airframe Scale
Controls Rudder, Elevator, Throttle
Length 295mm / 11.5"
Wingspan 368mm / 14.5"
Wing Area 3.95 sq dm / 61 sq in.
Flying Weight. 35 - 39g/1.2 - 1.4oz
Wing Load ~9.g/sq.dm / 3.0 oz/sq.ft.
Recommended
Receiver
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410
(N.B. Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Rec. Motor / G.Box Parkzone PKZ3624 (P-51 Motor/Gearbox)
Rec. Prop GWS 4040, GWS 4530
Skill Level - Build Intermediate
Skill Level - Pilot Intermediate
Tools required Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers
Rec. Adhesive UHU por / Foam safe CA / Aliphatic glue

Kit Content

SHEET PARTS 2mm laser cut Depron Airframe sheet
1mm printed & laser cut Depron fuselage sheet
1mm printed & laser cut Depron flight surfaces sheet
200 micron printed & laser cut polypropylene sheet
polyester sticker sheet
LOOSE PARTS 0.8mm laser cut plywood motor mount
Two 30mm Ø neoprene rubber tires
Six 3mm Ø noedymium magnets
100mm x 6mm Ø plastic tube
1mm x 0.4mm carbon fibre strip
1mm Ø carbon fibre rod
pre-shaped piano wire elevator & rudder control rods

Spares & Accessories

For building and finishing your Microaces Aero Kit see our Spares & Accessories page

Video

Assembly Guide

Click on booklet to view online!

 

 



More from this collection