Micro Scale Kits for Radio Control
Cart 0

Microaces Banshee T3 'Chipper'

¥10,500


A NEW BANSHEE WITH A FAMILIAR LOOK

 Microaces Banshee T3 (AKA 'Chipper') is fantastic new variation within the Banshee Range. With a retro military trainer look, clear vac formed canopy AND the ability to choose your Air Force insignia!  This is a great looking and performing aircraft for micro 4 channel flying.

  • An easy, quick build kit that's also tough AND repairable.
  • The ultimate introduction to building strong, lightweight micros using modern materials, clear canopy and 3D printed parts.
  • Use of the latest electronics and power systems from Microaces.  
  • An ideal platform for taking the step to 4 channel micro RC flying
  • Respectable aerobatic performance in a well balanced package
  • A choice of 17 self adhesive Air Force Insignias

Based around a 'one design' fuselage with more than a little of the ubiquitous Microaces Scrappee DNA in the mix, the Banshee is available in several distinct wing and tail variants...

T3 Trainer

The T3 Trainer is the ideal learning platform for traditonal 4 channel Radio Control; a low wing configuration with dihedral, responsive aileron control and great elevator and rudder authority too. Once mastered the T3 is an agile aerobatic aircraft that can introduce you to basic and more advanced aerial maneuvers.

And this T3 Trainer colour scheme is reminiscent of post war military training aircraft, and with many different air force sticker packs to choose from, you can personalize the aircraft to carry your bespoke scheme.

Banshee - a perfect platform for SR3X Stabilization

The Banshee, with direct control over the 3 axis of movement, is an ideal platform to make the most of our latest and most advanced electronic receivers that incorporate SR3X stability control. With full gain control on each channel, 2 switchable levels of stability and the ability to turn on/off as well during flight, it makes sense, and expands the conditions in which you can fly your Banshee. 

Screaming Banshee

The Banshee T3 benefits greatly from our BRUSHLESS performance setup for 1S. Using a GWS4530 prop, AP05 motor and the Brushless AIO receiver, the Banshee T3 is a capable and energetic flyer for medium size indoor venues (4 tennis courts) and bigger or the park of course!

TWO WAYS TO COMPLETE

The Banshee kit comes as standard with a 1.7g rotary servo for aileron control, brushless AP05 motor, prop and adapter.

To complete the kit for flight you just need to decide to:

Install the Microaces BRUSHLESS AIO 5CH receiver giving you All In One convenience of the fully integrated elevator and rudder servo system 

OR

Install the Microaces BRUSHLESS Electronics Pack providing seperate 5CH receiver and 2 x 1.7g rotary servos for maximum control

Both options are available with the following protocols:

  • DSM2/X (Spektrum compat.)
  • S-FHSS (Futaba compat.)
  • D8 (FrSky/Taranis compatible)
  • D16 (FrSky/Taranis compatible)
  • AFHDS 2A (FlySky compat.)

If unsure which protocol is compatible with your transmitter, check your transmitter instruction manual to find out which protocol(s) it uses. (Or get in contact and we will be able to check for you). 

VIDEO Supported Build

The Banshee is our first kit that relies predominantly on a Video Assembly Guide. The included printed instructions provide direct links through QR codes to on-line video content that leads you, in detail through the build, ensuring you obtain the skills required quickly AND have the best opportunity to complete the model, ready for flight. 

Specification

Microaces Banshee T3 Trainer

Airframe Low Wing Trainer
Controls 4 CH Rudder, Elevator, Ailerons & Throttle
Length 330mm / 13"
Wingspan 440mm / 17.5"
Wing Area 6.05 sq dm / 94 sq in.
Flying Weight. 42 - 45g/1.5 - 1.6oz
Wing Load ~7.2 g/sq.dm / 2.4oz/sq.ft.

Receiver


 Microaces BRUSHLESS AIO 5CH Rx with SR3X

Rec. Motor/ G.Box*

AP05 Brushless Motor 

Rec. Prop* GWS 4530 
Skill Level - Build Beginner
Skill Level - Pilot Intermediate 
Tools required

Scalpel, 180 Grit sandpaper or stick,

straight edge, tweezers

Rec. Adhesive Deluxe Materials Foam2Foam 

 *Now included in the kit


Kit Content

NOW INCLUDES 

AP05 Brushless motor 

GWS 4530 Prop and rubber prop adapter
1.7g Digital Rotary Servo for Aileron control
SHEET PARTS 2mm laser cut Depron Airframe sheet
1mm printed & laser cut Depron fuselage sheet
1mm printed & laser cut Depron flight surfaces sheet x 4
200 micron printed & laser cut polypropylene sheet
polyester sticker sheet
LOOSE PARTS 0.8mm laser cut plywood motor mounting system
Two 30mm Ø Sponge rubber tires + 3D printed hub assembly
Four 4mm Ø noedymium magnets
2mm Ø carbon fibre rod axle
pre-shaped piano wire elevator & rudder control rods


3D printed wheel attachment parts
Vac formed prop spinner


More from this collection