Fokker D.VII 4CH - Ernst Udet's Lo!
Fokker D.VII Flown by Ernst Udet, Jasta 4 -1918
A Revised Re-release
After a 3 year break the 4 Channel Microaces Fokker DVII returns with a more powerful HYPER motor, improved scale detail, an enhanced aileron control mechanism and is presented in one of the most recognisable D.VII liveries; that of WWI Ace Pilot, Ernst Udet.
Making History
Udet joined the Imperial German Air Service in April 1915 at the age of 19, eventually becoming a notable flying ace of World War I, scoring 62 confirmed victories. He was the highest scoring German fighter pilot to survive the war, and the second-highest overall after Manfred von Richthofen, his commander during his time in the 'Flying Circus'.
The Microaces kit reproduces Udet's unique personal Fokker D.VII. He had it painted with a candy-striped upper wing and a red fuselage with ‘Lo!’, the nickname of his girlfriend Eleanor Zink on the flanks. ‘Du doch nicht!‘ was emblazoned on the elevator - a taunt and challenge to Allied pilots. It roughly translated to 'Not you, Never!'
FOUR CHANNEL CONTROL
Using a closed loop pull-pull system, an Aileron Control Arm and an extra 1.5g linear servo, the addition of ailerons provides enough authority for some dynamic flying. The mechanism and design for controlling the ailerons is very similar to how the system operated on the full scale aircraft.
The Microaces standard kit NOW INCLUDES the 1.5g Aileron Servo as well as the powerful Microaces HYPER motor, GWS4530 prop and adapter.
WHAT ELSE IS NEEDED?
To complete the kit for radio controlled flight, all you need is an All In One (AIO) Receiver that's compatible with your transmitter.
Selecting the right receiver to complete your kit:
The Microaces AIO 5CH micro receiver is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
| DSM2/X Compat. | S-FHSS Compat. | FrSky D8 Compat. | FrSky D16 Compat. | AFHDS 2A Compat. |
3D Printed Pilots
A fantastic enhancement to the kit, that really upgrades the level of realism; a 3D Resin Printed 1/24th scale pilot. Hollow printed for lightness (~1.0g unpainted). Add one to your order for the ultimate 'finishing touch'! Click on the image to see the range!
Video
Specification
Aero Fokker D.VII Model
| Airframe | Scale |
| Controls - 4CH | Aileron, Rudder, Elevator, Throttle |
| Length | 295mm / 11.5" |
| Wingspan | 368mm / 14.5" |
| Wing Area | 3.95 sq dm / 61 sq in. |
| Flying Weight. | 37 - 42g/1.3 - 15oz |
| Wing Load | ~9.2 g/sq.dm / 3.1 oz/sq.ft. |
| Recommended Receiver |
Microaces AIO 5 Channel Receiver |
| Motor / G.Box | Microaces HYPER Motor Gearbox w/STANDARD prop shaft |
| Prop | GWS 4530 |
| Skill Level - Build | Intermediate |
| Skill Level - Pilot | Intermediate |
| Tools required | Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers |
| Rec. Adhesive | Deluxe Materials Foam2Foam |
Kit Content
| SHEET PARTS | 2mm laser cut Foam airframe sheet |
| 1mm printed & laser cut Foam fuselage sheet | |
| 1mm printed & laser cut Foam flight surfaces sheet | |
| 200 micron printed & laser cut polypropylene sheet | |
| polyester sticker sheet | |
| LOOSE PARTS | 0.8mm laser cut plywood motor mount & ACA |
| Two 30mm Ø neoprene rubber tires | |
| Six 3mm Ø noedymium magnets | |
| 200mm x 5mm Ø plastic tube | |
| 1mm x 0.4mm carbon fibre strip | |
| 1mm Ø carbon fibre rod | |
| 2m rigging wire spool & threader | |
| pre-shaped piano wire elevator & rudder control rods |
Assembly Guide
The Assembly Guide for this model is included in the kit.
4 Channel Addendum Instructions
To accompany the Fokker DVII Assembly Guide, there is a detailed video guide dedicated to building the 4 channel variant. QR codes and web links are NOW provided in the standard guide to access the videos.
Click on image below to view the full Video Addendum playlist.
