R.A.F. SE5a 'RAAF Post War' Kit
Royal Australian Air Force SE5a
The New Microaces SE5a revised kit includes more scale detail, increased strength and incorporates new dihedral bracing too. It also now comes with a printed full colour Assembly Guide included in the box.
Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. The Royal Aircraft Factory SE5a was an all round fighter that was much admired by those that flew it. And with the detail that we can incorporate into the print and build, it's almost like flying a professionally finished static model!
History in the Making
The RAAF was presented with thirty five SE5a aircraft after WWI as part of an Imperial Gift, recognising the nation's contribution to the Empire's defense. During World War I, the Australian Flying Corps operated SE5a aircraft in the fighter role over the Western Front with much success. Many of the acquired aircraft were used as advanced trainers up until 1929.
From 2022 this kit NOW INCLUDES...
This Microaces kit is now supplied 'as standard' with the most suitable Microaces motor/gearbox and propeller combination for the model.
So to complete the kit for radio controlled flight, all you need is an All In One (AIO) Receiver that's compatible with your transmitter.
Selecting the right receiver to complete your kit:
The Microaces AIO 5CH micro receiver is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
| DSM2/X Compat. | S-FHSS Compat. | FrSky D8 Compat. | FrSky D16 Compat. | AFHDS Compat. |
Build Video
As well as a comprehensive Assembly Guide included with the kit, there is a series of Youtube videos that guide you through the build. Created by the Microaces kit designer and full of additional tips, tricks and guidance, this playlist will help immeasurably with your Microaces build.
If you are unsure of your ability to build this beautiful kit, you no longer need to be concerned. The support you get with a Microaces build is second to none!
3D Printed Pilots
A fantastic enhancement to the kit, that really upgrades the level of realism is a 3 dimensional pilot. Add one to your order for the ultimate 'finishing touch'!
Specification
R.A.F. SE5a Model
| Airframe | Scale |
| Controls | Rudder, Elevator, Throttle |
| Length | 292mm / 11.5" |
| Wingspan | 368mm / 14.5" |
| Wing Area | 5.00 sq dm / 77.5 sq in. |
| Flying Weight. | 39.5g/1.3oz |
| Wing Load | 7.80g/sq.dm / 2.42oz/sq.ft. |
| Recommended Receiver |
Microaces AIO Receiver |
| Rec. Motor / G.Box* | Microaces Standard Motor/gearbox |
| Rec. Prop* | GWS 4530 |
| Skill Level - Build | Intermediate |
| Skill Level - Pilot | Intermediate |
| Tools required | Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers |
| Rec. Adhesive | Deluxe Materials Foam2Foam / Aliphatic glue |
*Now included in Kit
Kit Content
| NOW INCLUDES | Brushed Motor/Gearbox with standard prop shaft |
| GWS 4530 Prop and rubber prop adapter | |
| SHEET PARTS | 2mm laser cut Depron Airframe sheet |
| 1mm printed & laser cut Depron fuselage sheet | |
| 1mm printed & laser cut Depron flight surfaces sheet | |
| 200 micron printed & laser cut polypropylene sheet | |
| polyester sticker sheet | |
| LOOSE PARTS | 0.8mm laser cut plywood motor mount |
| Two 30mm Ø neoprene rubber tires | |
| Six 3mm Ø neodymium magnets | |
| 50mm x 4mm Ø plastic tube | |
| 2 x 1mm x 0.4mm carbon fibre strips | |
| 1mm Ø carbon fibre rod | |
| pre-shaped piano wire elevator & rudder control rods | |
| 3m Spectra rigging wire |
Spares & Accessories
For building and finishing your Microaces Aero Kit see our Spares & Accessories page
Video
Assembly Guide
Included in the Kit
Click on booklet below to view online!
